What Do I Need To Pay Attention To When Using An Online Densitometer?
Leave a message
As we all know, on-line densitometer is a device for continuous on-line measurement of liquid concentration and density, which can be directly used in industrial production processes. In the process of using the online densitometer, as long as we can grasp some matters in place, then we can minimize the error and make the measurement more accurate. Here is a small series to tell you in detail what matters need to pay attention to the use of online densitometers.
First, if the online densitometer has not been used for a long time, then before using it again, you need to empty the water in the sink and wipe it clean with a clean soft cloth, so as to avoid bubbles in the air adhering to the sink, and will not affect the normal use of the online densitometer.
Second, whether it is the storage place or the use place, the online densitometer can not be placed in direct sunlight or near the air conditioning. In addition, it is not possible to place the densitometer in places where the magnetic field is strong and where there is more dust. If we ignore this point, it will not only cause a large error in the measurement results of the densitometer, but also affect the service life of the instrument to a certain extent.
Third, when using the online densitometer, we also need to be careful, be sure to avoid falling or impact, otherwise it is easy to damage the online densitometer, affecting its normal measurement operations.
Fourth, the online density meter needs to be placed in a dry and cool environment, and it needs to be kept by a special person. In addition, if the online density meter is not used for a long time, it is also necessary to pull out the power supply and take down the measuring table and the sink.
In summary, if the use of online densitometer, the relevant operators can firmly grasp these precautions, then not only can maximize the service life of the instrument, but more importantly, can also ensure the readiness of the measurement results, the measurement error is reduced to a minimum.






