Home - Knowledge - Details

The reason why the tuning fork densitometer readings are different

Usually, the reading of the tuning fork density meter is larger below and smaller above, when it is immersed in different liquids, the volume will change, and the iron sand or lead particles at the bottom of the density meter are used to maintain balance. The tuning fork density meter rises or falls according to the changing balance of gravity and buoyancy. A well-functioning densitometer can only float, so the upward force of the buoyant force is slightly greater than the downward force of the gravity. But at equilibrium, the force of gravity is equal to the force of buoyancy.
Because the volume of the tuning fork densitometer does not change, the volume of the water discharged is the same. However, it becomes heavier because it contains more water. When gravity is greater than buoyancy, the densitometer will sink. The weight of the densitometer is less than the gravity of the same volume of water, so the densitometer floats again.
The basic principle of the tuning fork densitometer measurement: measure the blackening degree of the photosensitive material after exposure and development, that is, the blackness. In plate making, the silver bromide on the photosensitive material is subjected to the action of light, and is reduced to metallic silver after development, forming a certain photometric resistance. Large blackness, high density; Low blackness, low density. The meter with the filter can also measure the color density of the color manuscript. The measurement principle is similar to the above basic principle.
Generally speaking, the tuning fork density meter floats or sinks according to the change of gravity and buoyancy balance. A well-functioning densitometer can only float, so the upward force of the buoyant force is slightly greater than the downward force of the gravity. But at equilibrium, the force of gravity is equal to the force of buoyancy.
Because the volume of the tuning fork densitometer does not change, the volume of the water discharged is the same. However, it becomes heavier because it contains more water. When gravity is greater than buoyancy, the densitometer will sink. The weight of the densitometer is less than the gravity of the same volume of water, so the densitometer floats again. The reading of the densitometer is large below and small above, when it is immersed in different liquids, the volume does not change, and the iron sand or lead particles at the bottom of the densitometer are used to maintain balance.

Send Inquiry

You Might Also Like