Why Are More And More People Using Tuning Fork Densitometers?

The industries used include the petrochemical industry, brewing industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonates, silicates, etc.), which are specifically used in the above industries in the interface detection of multi-product pipelines, density detection of stirred mixtures, reactor endpoint monitoring, separator interface detection. Why are more and more people using tuning fork densitometers?
The plug-in density meter can be used for real-time on-line density detection. It can be applied to process control of products with density as the basic parameter or quality control with percentage of solids or percentage of concentration as the reference.
Without considering the distance between two anthers similar to differential pressure densitometers, the strength can be measured normally even if the fork is damaged. Convenient maintenance fork and circuit part is threaded connection, transport without considering the problem of diaphragm damage, low maintenance cost.
It can be installed directly on storage tanks and pipelines, and its measured fluid viscosity can be up to 20,000 CP, which is a significant feature of its advantages over other similar products, and it also has a high performance-to-price ratio.
The sensor is designed according to the principle of vibration, which is similar to a tuning fork with two teeth. The fork vibrates due to a piezoelectric crystal located at the root of the tooth. The frequency of the vibration is detected by another piezoelectric crystal.
Simple installation with a tuning fork densitometer, plug and play, maintenance-free. The density of mixed media containing solids or bubbles can be measured.