Radar tank level measurement

Name: Radar tank level measurement - China Radar tank level measurement Manufacturers Factory - Aipuxin
Brand: Aipuxin
SKU: 208850701

Radar tank level measurement is a non-contact level detection instrument using microwave technology, specifically designed to detect the position of static objects to assist in volume measurement and management.

Send Inquiry

Description

Shandong Aipuxin Automation Instrument Co., Ltd. is one of leading manufacturers and suppliers of radar tank level measurement in China, also supports customized service with low price. Please rest assured to wholesale cheap radar tank level measurement in stock here from our factory.

Characteristics of Radar tank level measurement:

Millimeter wave radar, with a maximum measurement accuracy of ± 2mm and a minimum blind spot of 0.05m.

The smaller antenna size meets more measurement requirements for working conditions.

Multiple lens antennas, smaller emission angles, more concentrated energy, stronger echo signals, and higher reliability compared to other radar products under the same industrial and mining conditions.

The radar tank level measurement has stronger penetration and can be used normally even in the presence of adhesion and condensation.

The dynamic signal range is larger, making the measurement of low dielectric constant media more stable.

Multiple measurement modes, with radar response time less than 1 second in fast measurement mode.

Technical Parameter

Working principle

Radar tank level measurement, a two wire instrument that outputs 4-20mA analog signal and overlays it with HART communication, or an RS-485, MODBUS four wire instrument, measuring a maximum distance of up to 120 meters. The radar antenna is further optimized and processed according to various working conditions. The use of new and fast microprocessors enables more efficient signal analysis, processing, and reaction, enabling the radar tank level measurement to work effectively in complex measurement environments such as corrosive media, reaction vessels, dusty silos, non-conductive media, and high temperatures.

Product Details

Characteristics

1. Small beam angle, concentrated energy, stronger anti-interference ability, greatly improving measurement accuracy and reliability;

2. The antenna size is small and easy to install;

3. The measurement blind spot is smaller and the measurement effect is also good for small cans;

4. The wavelength of the radar tank level measurement is shorter, making it more suitable for measuring the level of small particle materials;

5. Non contact measurement, no wear, no pollution;

6. The output signal of the radar tank level measurement can be selected from (4-20) mA/HART two wire system, four wire system, or RS485/MODBUS protocol, with four wire system power supply as low as 12VDC.

Product Application

The radar tank level measurement is suitable for non-contact continuous measurement of the level of liquids, slurries, and particles, and is suitable for large temperature and pressure changes; In situations where inert gases and volatiles exist.

The measurement method uses microwave pulses and can operate normally within the industrial frequency band range. The beam energy is low and can be installed in various metal and non-metallic containers or pipelines, without causing harm to the human body and the environment.

The radar tank level measurement is applied to river detection of powder, solid, acid and alkali, tank material, chemical tank measurement, coal powder cement measurement, oil tank power plant measurement, and corrosion pharmaceutical industry measurement.

Installation Instructions

Recommended distance (1) from the wall to the outer wall of the installed short pipe:

At a distance of 1/6 of the tank diameter from the tank wall, the minimum distance is 200mm.

Cannot be installed above the feed inlet (4).

It cannot be installed in the center position (3). If the High-precision silo radar level meter is installed in the center, it will generate multiple false echoes, and interference echoes will cause signal loss.

certificate

12 month warranty period; Lifetime maintenance free